Document Type : Research Paper

Authors

1 Department of Architectural Engineering, Ilam University, Ilam 69315-516, Iran

2 Associate Professor, Department of Architecture, Faculty of Technology and Engineering, Ilam University,Ilam, Iran

10.22061/jsaud.2026.113102.2376

Abstract

Abstract

In recent years, the integration of Phase Change Materials (PCMs) into building envelopes has gained significant scholarly attention as an effective passive strategy for enhancing building energy efficiency and indoor thermal comfort. This research investigates the thermal performance and energy-saving potential of incorporating paraffin-based PCMs into residential buildings located in Ilam, a city characterized by a hot and semi-arid climate. To conduct a comprehensive assessment, four distinct types of paraffin with varying melting points were integrated into beam-and-block ceiling slabs at three different structural positions. The dynamic thermal behavior and annual energy consumption of the building were meticulously simulated using the DesignBuilder software environment. The case study utilized a reference apartment block comprising eight residential units, each with a floor area of approximately 100 square meters.



The simulation results indicate that the integration of PCMs, irrespective of the specific melting point or installation layer, consistently contributes to a reduction in heating and cooling energy demand and enhances occupant thermal comfort levels. Comparative analysis of the tested configurations reveals that the optimal installation strategy for the climate of Ilam is to position the PCM layer between the structural concrete slab and the lightweight concrete topping of the ceiling. Furthermore, the findings demonstrate that paraffin with a melting point of 19°C exhibits the superior thermal performance in this climatic context. Remarkably, the application of this optimized configuration can result in an annual reduction in total energy consumption of up to 37%. These findings provide valuable insights for architects and engineers aiming to implement sustainable, energy-efficient solutions in residential construction within hot and semi-arid regions.

Keywords

Main Subjects