Aditya, L., Mahlia, T. M. I., Rismanchi, B., Ng, H. M., Hasan, M. H., Metselaar, H. S. C., … Aditiya, H. B. (2017). A review on insulation materials for energy conservation in buildings. Renewable and Sustainable Energy Reviews, 73(August 2015), 1352–1365. https://doi.org/10.1016/j.rser.2017.02.034
Anastaselos, D., Oxizidis, S., & Papadopoulos, A. M. (2011). Energy, environmental and economic optimization of thermal insulation solutions by means of an integrated decision support system. Energy and Buildings, 43(2–3), 686–694. https://doi.org/10.1016/j.enbuild.2010.11.013
Asadi, E., da Silva, M. G., Antunes, C. H., & Dias, L. (2012). A multi-objective optimization model for building retrofit strategies using TRNSYS simulations, GenOpt and MATLAB. Building and Environment, 56, 370–378. https://doi.org/10.1016/j.buildenv.2012.04.005
Akoochakian, S., & Khalatbari, R. (2018). The Selection of Materials for Residential Building Facade in the Hot and Dry climate of Iran Using Fuzzy Analytical Hierarchy Process (FAHP) Method. Maramat-E Asar & Baft-Haye Tarikhi-Farhangi, 8(15 ), 13-28 [In Persian]
Barzegar Z, Heidari SH. (2013). Investigation of the Effects of Building Envelopes Received Solar Radiation on Residential Energy Consumption: A Case of SW and SE Orientation in Shiraz. Honar-ha-ye-ziba, Volume 18, Issue 1 - Serial Number 1; Pages 45-56. [In Persian]
Baniassadi, A., Sajadi, B., Amidpour, M., & Noori, N. (2016). Economic optimization of PCM and insulation layer thickness in residential buildings. Sustainable Energy Technologies and Assessments, 14, 92–99. https://doi.org/10.1016/j.seta.2016.01.008
Delgarm, N., Sajadi, B., Kowsary, F., & Delgarm, S. (2016). Multi-objective optimization of the building energy performance : A simulation-based approach by means of particle swarm optimization. APPLIED ENERGY, 170, 293–303. https://doi.org/10.1016/j.apenergy.2016.02.141
Ebrahimpour A, Marefat M, Kari M. (2004). Optimization Of Thermal Insulation Of Residential Buldings In Climatic Condition Of Iran For Annual Thermal Loads. Modares Technical And Engineering. ; 17; 33 - 52. [In Persian]
Eslami M. Architecture & Energy. (2004). Iranian Fuel Conservation Company. Tehran. [In Persian]
Farhanieh, B., & Sattari, S. (2006). Simulation of energy saving in Iranian buildings using integrative modelling for insulation. Renewable Energy, 31(4), 417–425. https://doi.org/10.1016/j.renene.2005.04.004
Fesanghary, M., Asadi, S., & Geem, Z. W. (2012). Design of low-emission and energy-efficient residential buildings using a multi-objective optimization algorithm. Building and Environment, 49(1), 245–250. https://doi.org/10.1016/j.buildenv.2011.09.030
Friess, W. A., & Rakhshan, K. (2017). A review of passive envelope measures for improved building energy efficiency in the UAE. Renewable and Sustainable Energy Reviews, 72(November 2016), 485–496. https://doi.org/10.1016/j.rser.2017.01.026
Gagliano, A., Nocera, F., Patania, F., & Capizzi, G. (2013). A case study of Energy Efficiency Retrofit in social housing units. Energy Procedia, 42, 289–298. https://doi.org/10.1016/j.egypro.2013.11.029
Gong, X., Akashi, Y., & Sumiyoshi, D. (2012). Optimization of passive design measures for residential buildings in different Chinese areas. Building and Environment, 58, 46–57. https://doi.org/10.1016/j.buildenv.2012.06.014
Goudarzi, H., & Mostafaeipour, A. (2017). Energy saving evaluation of passive systems for residential buildings in hot and dry regions. Renewable and Sustainable Energy Reviews, 68, 432–446. https://doi.org/10.1016/j.rser.2016.10.002
Gustavsson, L., & Joelsson, A. (2010). Life cycle primary energy analysis of residential buildings. Energy and Buildings, 42(2), 210–220. https://doi.org/10.1016/j.enbuild.2009.08.017
Guidelines OF Topic 19. (2017). Office of National Regulation and Building Control. Tehran.. V2. [In Persian]
Harkouss, F., Fardoun, F., & Biwole, P. (2017). Author ’ s Accepted Manuscript. Journal of Building Engineering. https://doi.org/10.1016/j.jobe.2017.12.003
Hasan, A., Vuolle, M., & Sirén, K. (2008). Minimisation of life cycle cost of a detached house using combined simulation and optimisation. Building and Environment, 43(12), 2022–2034. https://doi.org/10.1016/j.buildenv.2007.12.003
Hensen, J. (2002). Hensen, J.L.M. (2002). Simulation for performance based building and systems design: some issues and solution directions. Proceedings of the 6th International Conference on Design and Decisions Support Systems in Architecture and Urban Planning, 7-10 July, 7–10.
Kaynakli, O. (2012). A review of the economical and optimum thermal insulation thickness for building applications. Renewable and Sustainable Energy Reviews, 161. Kayna(1), 415–425. https://doi.org/10.1016/j.rser.2011.08.006
Kheiri, F. (2018). A review on optimization methods applied in energy-efficient building geometry and envelope design. Renewable and Sustainable Energy Reviews, 92(May 2017), 897–920. https://doi.org/10.1016/j.rser.2018.04.080
Kasmae,M. (2005). Architecture and climate. Khak, Esfehan. [In Persian]
Lai, C. M., & Wang, Y. H. (2011). Energy-saving potential of building envelope designs in residential houses in Taiwan. Energies, 4(11), 2061–2076. https://doi.org/10.3390/en4112061
Lollini, Barozzi, Fasano, Meroni, & Zinzi, M. (2006). Optimisation of opaque components of the building envelope. Energy, economic and environmental issues. Building and Environment, 41(8), 1001–1013. https://doi.org/10.1016/j.buildenv.2005.11.011
Masnadi M, Heidari SH.( 2010). Roof simulation a method of detailed thermal survey in visual environmen. Honar-ha-ye-ziba. 2(42): 5-8. [In Persian]
Mardani, A., Zavadskas, E. K., Streimikiene, D., Jusoh, A., & Khoshnoudi, M. (2017). A comprehensive review of data envelopment analysis (DEA) approach in energy efficiency. Renewable and Sustainable Energy Reviews, 70(December), 1298–1322. https://doi.org/10.1016/j.rser.2016.12.030
Mirzaei, M., & Bekri, M. (2017). Energy consumption and CO2 emissions in Iran, 2025. Environmental Research, 154(January), 345–351. https://doi.org/10.1016/j.envres.2017.01.023
Mohammadnejad, M., Ghazvini, M., Mahlia, T. M. I., & Andriyana, A. (2011). A review on energy scenario and sustainable energy in Iran. Renewable and Sustainable Energy Reviews, 15(9), 4652–4658. https://doi.org/10.1016/j.rser.2011.07.087
Mehran, S., & Rad, M., & Jafarkazemi, F. (2008). An Analysis Of Absorbed Solar Radiation By Domed And Tilted Roofs And Comparison With Flat Roofs. Journal Of Technology Of Education , 2(4), 249-258. [In Persian]
Mahdavinejad M, Fakhari M. Stablishment of Optimum Designing Pattern in Buildings Roof Shape Based on Energy Loss.( 2013). Naqshejahan.; 3 (2) :35-42 [In Persian]
Madahi, m., & Abbasi, M. (2020). External thermal shell thermal behavior analysis-Exposure of building with materials and traditional and modern technology to optimize energy consumption (Case study: Residential buildings in Mashhad). ARMANSHAHR, 12(29 ), 167-183 [In Persian]
Mahmoody, M., Pakari, N., Bahrami, H. (2012). The effect of green roof on reducing environment temperature. The Monthly Scientific Journal of Bagh-e Nazar, 9(20), 73-82. [In Persian]
Mirhashemi M, Shapoorian SM. (2010).A new method of optimizing single glazed windows. Honar-ha-ye- ziba.. 2(43): 43-48. [In Persian]
Nasrollahi, N., & Salehi, M. (2015). Performance enhancement of double skin facades in hot and dry climates using wind parameters. Renewable Energy, 83, 1–12. https://doi.org/10.1016/j.renene.2015.04.019
Omidvar A. Rosti B. (2013). Effect of moisture content of building materials on thermal performance of exterior walls. Modaress mechanical engineering; 13(10); 152-156. [In Persian]
Omar, I., Virgone, J., David, D., & Corre, O. Le. (2017). ScienceDirect ScienceDirect Energy Saving Potential with a Double-Skin Roof Ventilated by The 15th International Symposium on District Heating and Cooling Natural Convection in Djibouti Assessing the feasibility of using the Vergnault temperature function. Energy Procedia, 140, 361–373. https://doi.org/10.1016/j.egypro.2017.11.149
Ramin, H., Hanafizadeh, P., & Akhavan-Behabadi, M. A. (2016). Determination of optimum insulation thickness in different wall orientations and locations in Iran. Advances in Building Energy Research, 10(2), 149–171. https://doi.org/10.1080/17512549.2015.1079239
Refahi, A. H., & Talkhabi, H. (2015). Investigating the effective factors on the reduction of energy consumption in residential buildings with green roofs. Renewable Energy, 80, 595–603. https://doi.org/10.1016/j.renene.2015.02.030
Razmgah, F. (2014). The Cool Roof Experimenting with Change of Color to Cool the Roof. Soffeh, 24(2), 25-34. [In Persian]
Sharifi, a., & Yamagata, Y. (2015). Roof ponds as passive heating and cooling systems: A systematic review. Applied Energy, 160, 336–357. https://doi.org/10.1016/j.apenergy.2015.09.061
Sharghi, A., & Azimi Fereidani, N. (2017). The Role Of Slope Shape Roofs In Heating Energy Consumption Based On Energy Gain. Journal Of Sustainable Architecture And Urban Design, 4(2 ), 65-74 [In Persian]
Shi, X., Tian, Z., Chen, W., Si, B., & Jin, X. (2016). A review on building energy ef fi cient design optimization rom the perspective of architects. Renewable and Sustainable Energy Reviews, 65, 872–884. https://doi.org/10.1016/j.rser.2016.07.050
Shirzadi, M., & Nagashzadeghan, M. (2015). Building Energy Optimization using Sequential Search Approach for Different Climates of Iran. International Journal of Renewable Energy Research (IJRER), 5(1), 210–216.
Soflaei, F., Shokouhian, M., Majid, S., & Shemirani, M. (2016). Investigation of Iranian traditional courtyard as passive cooling strategy ( a field study on BS climate ). International Journal of Sustainable Built Environment, 5(1), 99–113. https://doi.org/10.1016/j.ijsbe.2015.12.001
Taheri, M., & Shafie, S. (1995). A case study on the reduction of energy use for the heating of buildings. Renewable Energy, 6(7), 673–678. https://doi.org/10.1016/0960-1481(95)00090-7
Taheri, H. (2017). Thermal building simulation with Energyplus. Yazda, Tehran. [In Persian]
Tahbaz M.Jalilian SH.( 2005). The Role of Building Envelope In Residents’ Thermal Comfort. 4th International conference in Fuel Use Optimization in Bulding . Tehran; 1-18. [In Persian]
Topic 19.(2010).Office of National Regulation and Building Control. Tehran.V19. [In Persian]
Yu, J., Tian, L., Yang, C., Xu, X., & Wang, J. (2011). Optimum insulation thickness of residential roof with respect to solar-air degree-hours in hot summer and cold winter zone of china. Energy and Buildings, 43(9), 2304–2313. https://doi.org/10.1016/j.enbuild.2011.05.012
Znouda, E., Ghrab-Morcos, N., & Hadj-Alouane, A. (2007). Optimization of Mediterranean building design using genetic algorithms. Energy and Buildings, 39(2), 148–153. https://doi.org/10.1016/j.enbuild.2005.11.015
Zarghami, E., & c, E. (2016). Thermal Performance Evalution Of Green Roof On Sustainability And Energy Efficiency In Residential Buildings In Hot And Dry Climates OfF Iran. Journal Of Sustainable Architecture And Urban Design, 4(1 ), 75-90. [In Persian]
)
)