نوع مقاله : مقاله پژوهشی
نویسندگان
1 استادیار گروه معماری، دانشکده فنی و مهندسی، دانشگاه ایلام، ایلام، ایران
2 گروه معماری، دانشکده فنی و مهندسی، دانشگاه ایلام، ایلام، ایران
3 دانشیار گروه معماری، دانشکده فنی و مهندسی، دانشگاه ایلام، ایلام، ایران
4 دانشکده فنی و مهندسی، دانشگاه ایلام، ایلام، ایران
چکیده
چکیده:
در سالهای اخیر، استفاده از مواد تغییر فاز دهنده برای کاهش مصرف انرژی و بهبود وضعیت آسایش حرارتی ساختمانها بطور گسترده مورد توجه پژوهشگران قرار گرفته است. در این مطالعه، به بررسی میزان تأثیر استفاده از مواد تغییر فاز دهنده در کاهش مصرف انرژی و بهبود وضعیت آسایش حرارتی در ساختمانهای مسکونی شهر ایلام پرداخته شده است. برای بررسی میزان تاثیر مواد تغییر فازدهنده از چهار ماده پارافینی با نقاط ذوب مختلف و در سه موقعیت مختلف در سقفهای تیرچه و بلوک استفاده شد و میزان مصرف انرژی هر حالت در رمافزار Design Builder شبیهسازی گردید. برای ارزیابی، یک آپارتمان مسکونی مرجع با 8 واحد مسکونی و که هر کدام از واحدها دارای مساحت تقریبی 100 متر مربع بودند استفاده شد. نتایج نشان داد استفاده از مواد تغییر فاز دهنده با هر نقطه ذوب و در هر مکانی از سقف باعث کاهش مصرف انرژی و بهبود وضعیت آسایش حرارتی در ساختمان میگردد. نتایح نشان داد بهترین مکان برای استفاده از مواد پارافین در اقلیم ایلام قرارگیری پارافین در حد فاصل بتن سازهای سقف و بتن سبک بود و پارافین با نقطه ذوب 19 درجه سانتیگراد بهترین عملکرد را از خود نشان داده و استفاده از آن در طول سال میتواند میزان مصرف انرژی را تا 37 درصد کاهش دهد.
کلیدواژهها
موضوعات
عنوان مقاله [English]
Optimizing Energy Consumption and Improving Thermal Comfort in Residential Buildings through the Application of Phase Change Materials: A Case Study of Ilam City
نویسندگان [English]
- Behrouz Salehi 1
- Aliasghar Bagmohamadi 2
- Nazanin Nasrolahi 3
- Shahla Nouri 2
- Sima Ferdosian 4
1 Department of Architectural Engineering, Ilam University, Ilam 69315-516, Iran
2 Department of Architectural Engineering, Ilam University, Ilam 69315-516, Iran
3 Associate Professor, Department of Architecture, Faculty of Technology and Engineering, Ilam University,Ilam, Iran
4 Department of Architectural Engineering, Ilam University, Ilam 69315-516, Iran
چکیده [English]
Abstract
In recent years, the integration of Phase Change Materials (PCMs) into building envelopes has gained significant scholarly attention as an effective passive strategy for enhancing building energy efficiency and indoor thermal comfort. This research investigates the thermal performance and energy-saving potential of incorporating paraffin-based PCMs into residential buildings located in Ilam, a city characterized by a hot and semi-arid climate. To conduct a comprehensive assessment, four distinct types of paraffin with varying melting points were integrated into beam-and-block ceiling slabs at three different structural positions. The dynamic thermal behavior and annual energy consumption of the building were meticulously simulated using the DesignBuilder software environment. The case study utilized a reference apartment block comprising eight residential units, each with a floor area of approximately 100 square meters.
The simulation results indicate that the integration of PCMs, irrespective of the specific melting point or installation layer, consistently contributes to a reduction in heating and cooling energy demand and enhances occupant thermal comfort levels. Comparative analysis of the tested configurations reveals that the optimal installation strategy for the climate of Ilam is to position the PCM layer between the structural concrete slab and the lightweight concrete topping of the ceiling. Furthermore, the findings demonstrate that paraffin with a melting point of 19°C exhibits the superior thermal performance in this climatic context. Remarkably, the application of this optimized configuration can result in an annual reduction in total energy consumption of up to 37%. These findings provide valuable insights for architects and engineers aiming to implement sustainable, energy-efficient solutions in residential construction within hot and semi-arid regions.
کلیدواژهها [English]
- Sustainable Architecture
- Phase Change Materials (PCMs)
- Thermal Comfort
- Energy Consumption
- Ilam City